Krytal 2500 Lumen Titanium Flashlight

4 XPL LED Emitter Panel, Best-in-class brightness

Key Specs:

• Material: Solid titanium (Ti-6Al-4V / Grade 5)
• Battery: High-drain unprotected 18350 - Not Included 
• LED: XPL HI 6000K LED, XQE secondary LED
• Max output of 2,500 lumens, best in-class lumen-to-size-ratio
• Sapphire lens provides unbelievable high scratch resistance and durability, as well as adding long lasting value to this art piece.
• TIR optic
• Reverse polarity protection
• LVP (low voltage protection) for Li-ion battery
• Temperature control to avoid overheating problems
• Ti clip and screws, screw spacing is also compatible with SF clips.
• Unlimited combination of tritium vials (8 trit-slots around head, and 8 trit-slots on the tail).
• Tritium size: 1.5*6mm (not included)
• Dimensions: head diameter 27mm, tail diameter 25mm, length 87mm
• Weight: 85g w/o battery (recommended batteries: Keeppower, Xtar, Efest 18350.)

Groups:

• 1-Indoor : Moon- 5%- 25%- 100%, starts at moon by default, no memory.
• 2-Outdoor: 15%- 50%- 100% off-time memory.
• 3-Tactical: 100%- strobe.
• 4-Secondary LED: 25%- 100%-crazy strobe- beacon with 20% brightness background- breathing- beacon
• Hidden group: mail LEDs, Heartbeating- crazy strobe- beacon with 10% brightness background- breathing- strobe

Operation:

• Click to turn on or off. Tap to cycle modes.
• 1.5 seconds half pressing and hold to get into hidden group.
• 9 or more quick taps to enter configuration mode.
• At this time, flashlights will blink 4 times, (1234, interval, 1234, interval, 1234, finished.)
• Half-press can select 1-4 groups.
• Reverse battery protection, automatic temperature control.
• Low battery reminder: below 3V, flash 3 times every 5 minutes.
• Low power protection shutdown: Automatic shutdown below 2.7V.

• Gemini I 304 Stainless Steel Custom Flashlight. 
• Output: Triple XPL LED 2000 Lumen, 6000K, Cool White. In Turbo Mode it is 3000 Lumen.
• Output: Triple SST20 LED 1500 Lumen, 4000K, Warm White. In Turbo Mode it is 2000 Lumen.
• Modified ToyKeeper’s “Bistro” firmware. 23! Mode!
• Battery: 18350
• Finish: machine finish.
• Material: full Austenitic 304 stainless steel construction.
• Clicky: rubber FORWARD clicky.
• Lens: sapphire Lens.
• Weight: 138 g, 4.8 oz.
• Length: 97mm, 3.8 inch.
• Diameter: 23mm, 0.9 inch.
• Thread wall thickness: 1.5mm.
• Head wall thickness: 2.4mm.
• Overall wall thickness: 2.0mm.
• The standard version comes with silicon-based glow in the dark gasket (green or blue, randomly assigned).

• Material: Solid titanium (Ti-6Al-4V / Grade 5)
• LED: 4000K Nichia 219C high CRI (Color Rendering Index)
• LED: 5000K XPL
• Reverse polarity protection
• LVP (low voltage protection) for Li-ion battery
• Temperature control to avoid overheating problems
• Anti-reflective coated lens
• Aluminum alloy orange peel reflector
• Easy clicky switch operation
• Tail-stand capability
• Pocket clip
• Dimensions: 3.8 x 0.8 in (9.7 x 2.1 cm)
• Weight: 2.3 oz (65 g) without battery
• Spare O-rings
• 16 tritium slot (optional) 

Output (AA battery)

• Moonlight mode: 0.2 lumens, 30 days
• Low mode: 3.2 lumens, 70 hrs
• Mid mode: 30 lumens, 5 hrs
• High mode: 130 lumens, 1.1hrs

Output (14500 battery)

• Moonlight mode: 0.2 lumens, 20 days
• Low mode: 8.5 lumens, 31 hrs
• Mid mode: 90 lumens, 2.5 hrs
• High mode: 470 lumens, 58 mins

Features:

• With a 2.3-ounce body made from solid titanium (Ti6Al4V Grade 5) this ReyLight LAN flashlight is very tough but lightweight.
• It has groves that are designed to fit up to 10 pieces of Tritium vials. (1.5*6mm).
• It features a 4000K Nichia 219C high CRI LED with four different modes.
• On the lowest “moonlight” setting, it offers a soft 0.2 lumens, while the high delivers 130 lumens (with an AA battery).
• If you want more lumens, grab a 14500 battery and the power level jumps up to a whopping 470 lumens on High mode.
• The Ti Lan runs well on Eneloop AA, Alkaline AA, Lithium Primary Energizer Ultimate, and Lithium Rechargeable 14500.

Easy operation:

• Click to turn on, tap to cycle modes.
• Click again to turn off.
• Starts at moon everytime by default. 8 quick taps will activate the memory function.
• It will remember the last used mode. Another 8 taps will turn off the memory.

• Material: Solid titanium (Ti-6Al-4V / Grade 5)
• LED: 4000K Nichia 219C high CRI (Color Rendering Index)
• LED: 5000K XPL
• Reverse polarity protection
• LVP (low voltage protection) for Li-ion battery
• Temperature control to avoid overheating problems
• Anti-reflective coated lens
• Aluminum alloy orange peel reflector
• Easy clicky switch operation
• Tail-stand capability
• Pocket clip
• Dimensions: 3.8 x 0.8 in (9.7 x 2.1 cm)
• Weight: 2.3 oz (65 g) without battery
• Spare O-rings
• 10 tritium slot (optional)

Output (AA battery)

• Moonlight mode: 0.2 lumens, 30 days
• Low mode: 3.2 lumens, 70 hrs
• Mid mode: 30 lumens, 5 hrs
• High mode: 130 lumens, 1.1hrs

Output (14500 battery)

• Moonlight mode: 0.2 lumens, 20 days
• Low mode: 8.5 lumens, 31 hrs
• Mid mode: 90 lumens, 2.5 hrs
• High mode: 470 lumens, 58 mins

Features:

• With a 2.3-ounce body made from solid titanium (Ti6Al4V Grade 5) this ReyLight LAN flashlight is very tough but lightweight.
• It has groves that are designed to fit up to 10 pieces of Tritium vials. (1.5*6mm).
• It features a 4000K Nichia 219C high CRI LED with four different modes.
• On the lowest “moonlight” setting, it offers a soft 0.2 lumens, while the high delivers 130 lumens (with an AA battery).
• If you want more lumens, grab a 14500 battery and the power level jumps up to a whopping 470 lumens on High mode.
• The Ti Lan runs well on Eneloop AA, Alkaline AA, Lithium Primary Energizer Ultimate, and Lithium Rechargeable 14500.

Easy operation:

• Click to turn on, tap to cycle modes.
• Click again to turn off.
• Starts at moon everytime by default. 8 quick taps will activate the memory function.
• It will remember the last used mode. Another 8 taps will turn off the memory.

If you want to buy 14500 battery, please use the following link:

• Material: Solid Copper or Brass
• LED: 4000K Nichia 219C high CRI (Color Rendering Index)
• LED: 6000K XPL
• Reverse polarity protection LVP (low voltage protection) for Li-ion battery
• Temperature control to avoid overheating problems
• Anti-reflective coated lens
• Aluminum alloy orange peel reflector
• Easy clicky switch operation
• Tail-stand capability Pocket clip Dimensions: 3.8 x 0.8 in (9.8 x 2.1 cm)
• Weight: 3.3 oz (93 g) without battery
• Spare O-rings 1 tritium slot (optional)

• Output-AA battery
  Nichia219C
  Moonlight mode: 0.2 lumens, 30 days
  Low mode: 3.2 lumens, 70 hrs
  Mid mode: 30 lumens, 5 hrs
  High mode: 130 lumens, 1.1hrs
  XPL
  Moonlight mode: 0.3 lumens
  Low mode: 5 lumens, 70 hrs
  Mid mode: 34 lumens, 5 hrs
  High mode: 220 lumens, 1.1hrs

  Output-14500 battery
  Nichia219C
  Moonlight mode: 0.2 lumens, 20 days
  Low mode: 8.5 lumens, 31 hrs
  Mid mode: 90 lumens, 2.5 hrs
  High mode: 470 lumens, 58 mins*
  XPL
  Moonlight mode: 0.3 lumens, 20 days
  Low mode: 16 lumens, 31 hrs
  Mid mode: 187 lumens, 2.5 hrs
  High mode: 800 lumens, 58 mins*
  *Exact Runtime Depends on Battery and Ambient Temperature

Made of solid copper bar.

Using single AAA battery, max 110 lumens, or 10440 Li-ion battery, max 300 lumens.     Flat top, UNPROTECTED 10440 battery suggested.  Some button top could also work, but some brands make the button to long, might cause a problem.

There is one tritium slot at the tail switch, 1.5*6mm size.  

Solid Copper

Rechargeable 10180 

1.5” long  X  .25” dia.

Key Ring Loop 

INCLUDES 

Key Ring 

Charge Cable

10180 Battery 

Gift Box

1.5*6mm for Reylight

• Gaseous Tritium Light Source (GTLS) is a light source that does not require any power input to provide continuous illumination in darkness for more than 10-15 years.  It also makes your Reylight looks awesome, and awesome is important 🙂
• Use UV glue and 365nm UV light to install the tritium vials.

This anodized washer will bring unique vibrant color to your Reylight LAN and Pineapple.

Just unscrewed the tail cap and use the washer to replace the pocket clip.

This USB battery charger can be used for Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440.

CAUTION Use power cable for this charger only. Serious damage could occur if you plug this into other USB ports. 

14500 Rechargeable 800mAh Protected Battery

Brand: Reylight

Description:

High Performance Flashlight needs High Performance Battery. No one wants to see their flashlight out of juice during EDC chores.

To squeeze the most out of your Reylight 14500 flashlight, please make sure you add Reylight 14500 battery into your EDC rotations.

Reylight 14500 batteries are:

• Rechargeable
• 800mAh
• Protected
• 3.7 v
• 14500 Li-ion