PM Mac2 Gen 2 3.5"- Cracked Earth

Mcnees Spare Parts Kit

$115.00

Canadian Orders Ship Free

Have some old, beat up, or gunked up MAC 2 hardware in need of a replacement? Look no further! The MAC 2 Spare Parts Kit has all you could need! THE PARTS IN THESE KITS FIT BOTH THE 3" AND THE 3.5" MAC 2 Gen 1!

** Please note- our kits are coloured, not the stainless as shown in photo **

Includes:

- Pivot Barrel and Matching Screw

- Set of Thumbstuds

- Two Standoffs

- Two Scale Screws

- Two Clip Screw

Ridge Runner

$478.00

Canadian Orders Ship Free

Product Information

Blade Show Atlanta's 2024 American-Made Fixed Blade of the Year®

Our McNees Ridge Runner Fixed Blade might just be the last knife you need (or want) to use for all your hunting and outdoor expeditions!

Designed by Jonathan McNees, an ex-Marine, lifelong hunter, and outdoorsman who got his start making knives in 2008, the Ridge Runner is purpose-built to tackle the toughest and grittiest conditions you can throw at it.

Featuring a robust fixed blade with a high and thin flat grind, it slices like a champ. And made from .135" CPM 3V steel, it's tough enough to take on all the hard work you need to get done.

The elegantly contoured handles have been carefully crafted to avoid hot spots while providing maximum grip, and they can be swapped out in minutes if you are looking to customize with other Ridge Runner handle colors or materials.

An included Kydex sheath offers exceptional retention and is set up with a loop for belt carry and slots for rigging to web gear. A drain hole on the bottom of the sheath helps prevent moisture build-up inside.

And to top it all off, the whole package is Made in the USA.

McNees Ridge Runner Specifications:

Steel: CPM 3V
Thickness: .135"
OAL: 8.195"
Blade Length: 3.7"
Handle: Synthetic, Various Materials
Country of Origin: USA

MAC2 Gen 2 -3.5” FRAG Edition

$890.00

Canadian Orders Ship Free

This MAC 2 3.5" features our FRAG milling pattern inlaid on both face and lockside scale. All pattern milling done in-house.

The big brother to the MAC 2 is here! With a 3.5” blade in CPM MAGNACUT, and an updated pivots and thumbstud, the 3.5” takes the ultra smooth MAC2 to a new level.

The McNees Performance Machined Line is a labor of love. I wanted to bring a more affordable line of knives to the market but I would only do it if I could keep them made in the USA. This is not the easiest or most profitable route but it's important to me. All the outsourced work on these is done in the USA and a good portion of the work is done right here in my shop, including fitting locks, detents and sharpening. As we continue to grow, more processes will be done in house. The MAC 2 3.5" is an extremely pocket friendly and ergonomic design. With lines that flow open or closed. It sports all the features of a full custom.

SPECS:

Blade - 3.4"

OAL- 7.5"

Weight: 4.5 oz.

Blade Steel - CPM MAGNACUT

Handles and Clip - 6AL-4V Titanium

Hardware - Titanium

Updates for the new Get 2-
- Hardware all made in the US.
- Bearings are now Ceramic with Derlin Cage
- Body and clip screws are now TI
-Standoffs are threaded instead of the dockside handle, so there is now body screws on both sides
-Standoffs now have shoulders that fit into counterbores. ( Acts as locating pins to hold everything together more precisely)
- Now have a milled pocket for the base of the clip.

MAC2 Gen 2- 3.5" - Jigged

$935.00

Canadian Orders Ship Free

The big brother to the MAC 2 is here! With a 3.5” blade in CPM MAGNACUT, and an updated pivots and thumbstud, the 3.5” takes the ultra smooth MAC2 to a new level.

The McNees Performance Machined Line is a labor of love. I wanted to bring a more affordable line of knives to the market but I would only do it if I could keep them made in the USA. This is not the easiest or most profitable route but it's important to me. All the outsourced work on these is done in the USA and a good portion of the work is done right here in my shop, including fitting locks, detents and sharpening. As we continue to grow, more processes will be done in house. The MAC 2 3.5" is an extremely pocket friendly and ergonomic design. With lines that flow open or closed. It sports all the features of a full custom.

SPECS:

Blade - 3.4"

OAL- 7.5"

Weight: 4.5 oz.

Blade Steel - CPM MAGNACUT

Handles and Clip - 6AL-4V Titanium

Hardware - Titanium

Updates for the new Get 2-
- Hardware all made in the US.
- Bearings are now Ceramic with Derlin Cage
- Body and clip screws are now TI
-Standoffs are threaded instead of the dockside handle, so there is now body screws on both sides
-Standoffs now have shoulders that fit into counterbores. ( Acts as locating pins to hold everything together more precisely)
- Now have a milled pocket for the base of the clip.

MAC2 Gen 2- 3.5” SHOCKWAVE Edition

$891.00

Canadian Orders Ship Free

This MAC 2 3.5" features our SHOCKWAVE milling pattern inlaid on both face and lockside scale. All pattern milling done in-house.

The big brother to the MAC 2 is here! With a 3.5” blade in CPM MAGNACUT, and an updated pivots and thumbstud, the 3.5” takes the ultra smooth MAC2 to a new level.

The McNees Performance Machined Line is a labor of love. I wanted to bring a more affordable line of knives to the market but I would only do it if I could keep them made in the USA. This is not the easiest or most profitable route but it's important to me. All the outsourced work on these is done in the USA and a good portion of the work is done right here in my shop, including fitting locks, detents and sharpening. As we continue to grow, more processes will be done in house. The MAC 2 3.5" is an extremely pocket friendly and ergonomic design. With lines that flow open or closed. It sports all the features of a full custom.

SPECS:

Blade - 3.4"

OAL- 7.5"

Weight: 4.5 oz.

Blade Steel - CPM MAGNACUT

Handles and Clip - 6AL-4V Titanium

Hardware - Titanium

Updates for the new Get 2-
- Hardware all made in the US.
- Bearings are now Ceramic with Derlin Cage
- Body and clip screws are now TI
-Standoffs are threaded instead of the dockside handle, so there is now body screws on both sides
-Standoffs now have shoulders that fit into counterbores. ( Acts as locating pins to hold everything together more precisely)
- Now have a milled pocket for the base of the clip.